We conduct courses offer to Singapore Army on Soldier DIY in Vehicle Land Mine, Improvise Reactive Amour Plate, Oxygen Purification Kits use for River Crossing & Anti Thermal Image Wool Cover for Leopard 2 Tank

We conduct courses offer to Singapore, USA, Aussie Army on Soldier DIY in:

1) DIY on Vehicle Land Mine making. 

2) DIY on Improvise Reactive Amour Plate for Leopard 2 Tank.

3) DIY on Oxygen Purification Kits use for River Crossing on Battle Tank & AFV for Crews (also serve as NBC back up kit）. 

4) DIY on Anti Thermal Image Wool Cover for Leopard 2 Tank to avoid AH-64 Apache detection. 












European Armour Union Pte Ltd

10 Anson Road #10-11 Singapore 079903

E-mail: sales@euroau.com 
web site http://www.euroau.com

Armour Soldier DIY Oxygen Purification Kits use for River Crossing on Battle Tank & AFV Crews (also serve as NCB back up kit)

Armour Soldier DIY Oxygen Purification Kits use for River Crossing on Battle Tank & AFV for Crews (also serve as NBC back up kit） 

1) Wear a pair of chemical acid handling glove, pour Lithium Hydroxide powder into a wire mesh cylinder tube & insert a tight wire mesh top cover on it.





2) Insert the filled Lithium Hydroxide cylinder into a bigger wire mesh cylinder as show above with top suction  outlet which can fix into a standard vacuum cleaner suction  hose or tube.

(Lithium Hydroxide powder filled cylinder is 3/4 length of the bigger wire mesh cylinder with suction outlet )







3) Connect Battle Tank or AFV vehicle DC source to AC convertor as shown above.

4) Buy vacuum cleaner with water filter function.

Connect vacuum hose on the to large wire mesh cylinder & power on it.

The chassis hull air is being purified as the air with carbon dioxide is pass through the wire mesh cylinder filled with Lithium Hydroxide while the pure air which is slightly acidic is pass through vacuum cleaner water filter to remove any toxin.  

5) Buy 2 metal jerry fill it to 3/4 full with water.

Place one inside chassis hull & one secure next to engine air intake together with nitrogen gas cylinder.  

Pour 500g of aquarium oxygen tablets (hydrogen peroxide) inside chassis hull jerry can when oxygen level is running low.

Pour 500g of aquarium oxygen tablets (hydrogen peroxide) inside engine jerry can & turn on nitrogen gas cylinder simultaneously inside engine compartment for amphibious operation river bed crossing or beach head landing .  

European Armour Union Pte Ltd

10 Anson Road #10-11 Singapore 079903

E-mail: sales@euroau.com 
web site http://www.euroau.com

Gun Extension on Leopard 2A4 120mm L44 Gun to L55 Gun using Rotational Fiction Welding Process

1) Acquired 2 new 120mm L44 guns barrels.

2) Cut one gun to length at 1.31 meters long. (or buy from European Armour Union Pte Ltd in Singapore)

3) Sand cast or forge a bell end on one end of the 1.31meters short barrel guns using the original remaining gun material. (Bell end provide ultimate Fit of Firing failure proof).

4) Clamp the new L44 gun barrel & the  1.31meters short barrel guns onto the chuck of the Rotational fiction welding machine.

5) Heat up L44 gun end & the bell end of the 1.31meters long gun with 2 piece removable top & bottom black smith oven with bottom tray filled with coal & blasted with gas & pure oxygen for 30 minutes till it reaches 2,500 degree.

6) Use infra red temperature scanner to capture gun end temperature & remove the 2 piece top & bottom mobile oven.

7) Completed the joining process by rotating the 1.31 meters gun at high speed with full contact with the L44 gun, when both ends reach 3,200 degree stop the rotational chuck  & apply transverse compressive pressure between the 2 guns to forge weld it together.

8) The bell ends of the 1.31 meter guns will enlarge slightly due to the bulging joint  of the rotational fiction welding process which ultimately strengthen the gun joint diameter compressive forces use for high pressure firing (Bell end provide ultimate Fit of Firing failure proof).

European Armour Union Pte Ltd

E-mail: sales@euroau.com 
web site http://www.euroau.com

Leopard 2 SG Tank Gun upgrade to New NATO 130mm L51

Leopard 2 SG Tank Gun upgrade to New NATO 130mm L51 can be done by enlargement (EDM die punch) on internal diameter turret "holding sleeve angular block cube" modification or replacement of an newly forge gun sleeve angular block cube as shown in red square.

European Armour Union Pte Ltd10 Anson Road #10-11 Singapore 079903
E-mail: sales@euroau.com 
web site http://www.euroau.com

Leopard 2 Engine upgrade to 2,000 HP

Leopard 2 Engine Power upgrade to 2,000 HP

  

We provide Leopard 2 SG Engine power upgrade to 2,000 HP with Dual "Two" Diesel 1,000 HP - MT 881 Ka-500 bottom mounted together after 90 degree rotate to the right & another to the left with additional a power transfer box (2 engines direct drive shaft gears to drive Transmission main shaft) use for NATO 130 mm or 150 mm main Gun heavy weight application.

The width & height of the Dual "Two" MT 881 Ka-500 engines dimension fit comfortably in the original Leopard 2 A4 1,500HP engine compartment.

Options on Power Transfer Box, Direct Drive Gears or Planetary Drive Gears are for sale.

The Dual Engines Power output ranges from 1,800 to 1,900 HP.

e-mail: sales@euroau.com

European Armour Union Pte Ltd

10 Anson Road #10-11 Singapore 079903
E-mail: sales@euroau.com 
web site http://www.euroau.com

Development of Wind Tunnel Technology use for F15SG & F16 vertical take off on Endurance 160 Helicopter Carrier.

Development of Wind Tunnel Technology use for F15SG & F16 vertical takeoff on Endurance 160 Helicopter Carrier.

We intended to afloat the F15SG fighter jet to 5 meters in the air using the back wind tunnel and only after the F15SG made stable contact with the Crane flexible U shape carbon fiber spring. Next, the twin jet engines are fired up to take-off thrust: 58,000 pound (26,309 kilogram) to afterburning charging and follow by release of the 2 bottom hydraulic quick release latch cables for the plane to take flight.

The whole process must be done under 8 to 10 seconds to prevent instability to set in.

A Crane located next to back wind tunnel is equipped with 2 Carbon Fiber flexible U shape spring with thick honey comb rubber contact pad attached to hold the wings of F15SG to prevent it from flipping over during afloat.

Meanwhile, the 2 bottom hydraulic quick release latch cables also help to stabilize the F15SG fighter jet during afloat in midair with it jet engine turn on at low speed to maintain stability.

The front wind tunnel will continue to push F15SG higher (or maintains altitude) on it wings lift force (artificial wing lift force from front wind tunnel) as it take off from the back wind tunnel moving forward to the front.

The front wind tunnel has 25% more lifting power than the back wind tunnel which it mission is to afloat the F15SG plane only. (Both Wind Tunnel diameter are at 18 meters each)

Design & Build by European Armour Union Pte Ltd.

Build your Country Own Main Battle Tank with us

Build your Country Own Main Battle Tank with us - all parts will be supplied by us.

We can supply Battle Tank parts on:

1) New 120mm L52 Gun
2) Reconditioned 120mm L55 Gun (Refurbished & extended using original L44 Gun)...
3) Firing control system - Gunner, Commander, Computer sensor
    mechanism for turret, night vision sight
4) Suspension Wheels & Track
5) Chassis - 1000 or 1500 HP (10 or 12 suspension wheels option)
6) Auto Loading Mechanism - 2 option available
7) Reactive Armour
8) 1500 HP Diesel Engine made in USA - Both Gas or liquid cooled options
9) 1600 HP Gas Turbine Engine from Ukraine10) Others etc.

All parts supply are made in Europe.

European Armour Union Pte Ltd

10 Anson Road #10-11 Singapore 079903
E-mail: sales@euroau.com 
web site http://www.euroau.com