Development of Wind Tunnel Technology use for F15SG & F16 vertical take off on Endurance 160 Helicopter Carrier.

Development of Wind Tunnel Technology use for F15SG & F16 vertical takeoff on Endurance 160 Helicopter Carrier.

We intended to afloat the F15SG fighter jet to 5 meters in the air using the back wind tunnel and only after the F15SG made stable contact with the Crane flexible U shape carbon fiber spring. Next, the twin jet engines are fired up to take-off thrust: 58,000 pound (26,309 kilogram) to afterburning charging and follow by release of the 2 bottom hydraulic quick release latch cables for the plane to take flight.

The whole process must be done under 8 to 10 seconds to prevent instability to set in.

A Crane located next to back wind tunnel is equipped with 2 Carbon Fiber flexible U shape spring with thick honey comb rubber contact pad attached to hold the wings of F15SG to prevent it from flipping over during afloat.

Meanwhile, the 2 bottom hydraulic quick release latch cables also help to stabilize the F15SG fighter jet during afloat in midair with it jet engine turn on at low speed to maintain stability.

The front wind tunnel will continue to push F15SG higher (or maintains altitude) on it wings lift force (artificial wing lift force from front wind tunnel) as it take off from the back wind tunnel moving forward to the front.

The front wind tunnel has 25% more lifting power than the back wind tunnel which it mission is to afloat the F15SG plane only. (Both Wind Tunnel diameter are at 18 meters each)

Design & Build by European Armour Union Pte Ltd.

Build your Country Own Main Battle Tank with us

Build your Country Own Main Battle Tank with us - all parts will be supplied by us.

We can supply Battle Tank parts on:

1) New 120mm L52 Gun
2) Reconditioned 120mm L55 Gun (Refurbished & extended using original L44 Gun)...
3) Firing control system - Gunner, Commander, Computer sensor
    mechanism for turret, night vision sight
4) Suspension Wheels & Track
5) Chassis - 1000 or 1500 HP (10 or 12 suspension wheels option)
6) Auto Loading Mechanism - 2 option available
7) Reactive Armour
8) 1500 HP Diesel Engine made in USA - Both Gas or liquid cooled options
9) 1600 HP Gas Turbine Engine from Ukraine10) Others etc.

All parts supply are made in Europe.

European Armour Union Pte Ltd

10 Anson Road #10-11 Singapore 079903
E-mail: sales@euroau.com 
web site http://www.euroau.com

World Leader on Sales of Reconditioned Leopard 2 120mm L44 Guns & L55 Guns extension.

World Leader on Sales of Reconditioned Leopard 2 120mm L44 Guns & L55 Guns extension.

1) OD & ID welding on all cracks & cavity wears
2) Hexagon sleeve OD casting on parts of badly crack guns
3) Rotational hot forging on the hexagon sleeve
4) EDM wire cut an old L44 Gun to 1.31m in length
5) Connect 1.31m Gun to an L44 Gun using in-house classified Technology
6) Treatment done on the joint connection – steps classified
7) Boring, Honing & ID chromium Plating to complete the process

 

Extreme Upgrade of Leopard 2 Main Battle Tank for Vanguard Battalion Units.

 

 

Extreme Upgrade of Leopard 2 Main Battle Tank for Vanguard Battalion Units.

i) Improvise L55 Gun Barrel Power by forge weld a 1.3m Short Gun Barrel onto an L44 Gun. (Technology knowhow classified)

ii) Anti-thermal paint to mask off sight from Apache Helicopter & it thermal missile.

iii) Install 1 Advanced Light Attack Missile on the back of the turret, capable of engaging:
•Armour Vehicles (close-combat killing zone to 5-25 km)
•Buildings & Command post
•Hovering Helicopters

iv) Convert to a 1800 HP Petrol Engine (reuse of existing Renk HSWL 354 transmission - just replace 3 gears with different ratio)

v) Install Oxygen & Nitrogen Life Support Kit for River Crossing & Beach Head Landing.

vi) Install Radar System to detect Infantry Soldier & Vehicles
•Walking soldier 3.5 Km
•Crawling soldier 1 Km
•Light vehicle 7 Km

Interested please contact us via e-mail: sales@euroau.com

 

Greece OEM Anti-Thermal Image Paint specially formulated for Leopard 2 Battle Tank application is available & sold by European Armour Union Pte Ltd

Greece OEM Anti-Thermal Image Paint specially formulated for Leopard 2 Battle Tank application is available & sold by us.

We guarantee to our customers that all Apache Helicopter & 3rd Generation Tank thermal sight cannot detect any vehicles coated with our OEM Anti-thermal Image Paint.

Interested please contact us for bulk units purchase & long term application pricing. e-mail: sales@euroau.com

 

 

Design & Made in Italy Bionix II Amphibious Float Kit

Design & Made in Italy Bionix II Amphibious Float Kit (Manufacturer had proved & workable amphibious float kit on M113 IFV)

 

Marketed by European Armour Union Pte Ltd - e-mail sales@euroau.com 

 

 

3rd Generation Modernized T-72 version 4 Main Battle Tank available for sale. Seller European Armour Union Pte Ltd (300 units of stock inventory available)

3rd Generation Modernized T-72 version 4 Main Battle Tank available for sale.

300 units of stock inventory available. Winner takes all.

Interested please contact us via e-mail: sales@euroau.com